Body – extruded anodized aluminum coated with weather resistant powder materials
Code 1 – luminaire without through wiring, equipped with 1 m cable and sealed connector (terminal block).
Code2 – luminaire with through wiring, equipped with 2 cables cuts 200 mm long each and one sealed connector (terminal block) for daisy chain.
MidiLine – 80 mm
MidiLine M – 50 mm
MidiLine RGB – 44 mm
MidiLine RGBW – 80 mm
MidiLine – 220 V (power supply in the luminaire body).
MidiLine RGB and MidiLine RGBW – working voltage 24-48 V of direct current. External power supply to be ordered separately according to the number of light fixtures attached, DMX decoder is embedded in the body.
Installed using standard G-CRON brackets.
In case of through-wired luminaires installation, luminaire 1 shall be installed at the end of the circuit; otherwise, it is required to install special plugs into the end connector.
Extra bright LED with different light color.
3К – white 3000К
4К – white 4000К
А – yellow(593 nm)
R – red (634 nm)
G – green (521 nm)
B – blue (465 nm)
RGB – multicolor (light control in accordance with a DMX-512/RDM protocol)
RGBW –multicolor+ white (light control in accordance with a DMX-512/RDM protocol)
Polymer lenses with various light distribution angles.
S – narrow 8-12°
M – medium 30-32°
W – wide 42-46°
WW – extra wide 60°
O – elliptical
OWAS – flood asymmetrical
Powder coating in any color from the standard color range
Special brackets (G-KRON) for installation made from stainless steel to be ordered separately.